CUSTOM TAPERED SPORT LUGGAGE RACK
J055712015-03-16
GENERAL
Kit Number
50300066A, 50300116
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Separate purchase and installation of additional parts or accessories may be required for proper installation of this kit on your model motorcycle. See the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only) for a list of required parts or accessories for your model.
Loctite® 271 (red) (99671-97) is available from a Harley-Davidson dealer.
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1.
Install the kits for the directional relocation, docking points, side plates and sissy bar upright according to each kit instructions. Do not install the upright screws at this time. Note that the sissy bar upright instructions affect the installation of the docking points.
2.
See Figure 1 and Table 1. Apply two or three drops of Loctite 271 to the button head screws (2) from the luggage rack kit.
3.
Position the luggage rack (1) between the side plates and insert the screws through the luggage rack, side plate and upright holes. Tighten screws to 10.8–13.6 N·m (8–10 ft-lbs).
WARNING
Do not exceed luggage rack weight capacity. Too much weight can cause loss of control, which could result in death or serious injury. (00373a)
  • The luggage rack weight capacity is limited to a maximum of 10 lbs (4.5 kg).
  • Do not use this rack as a seat.
  • Do not exceed the rack weight capacity.
SERVICE PARTS
Figure 1. Service Parts: Sport Luggage Rack
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Luggage rack
Not Sold Separately
2
Screws, button head TORX® (4)
94593-98
3
Label, weight limit
Not Sold Separately
Items mentioned in text, but not included in kit.
A
Side plates
B
Sissy bar upright