TRIKE TRUNK DOOR RETRACTABLE TETHER
J055762012-03-16
GENERAL
Kit Number
53000237
Models
For model fitment information, See the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
There are no Service Parts available with this kit.
INSTALLATION
1.
See Figure 1. Remove the existing tether. Install a new tether wheel with the tether bracket facing outward and install the screw from the inside as shown in Figure 1.
2.
See Figure 2. Pull down the tether and fasten it to the clevis on the trunk lid.
3.
Install the Bar & Shield logo to the retractable tether as shown in Figure 1.
4.
Repeat steps for the opposite side.
1Retractable tether
2Logo
Figure 1. Retractable Tether and Bar & Shield Logo
1Screw
Figure 2. Tether fastener