AIR CLEANER COVER
J033152018-07-27
GENERAL
Kit Numbers
27956-10, 29417-04, 29820-11, 29400366, 61300057, 61300058, 61400007, 61400009, 61400019, 61400021, 61400049, 61400050, 61400052, 61400163, 61400164, 61400166, 61400167, 61400168, 61400170 and 61400323
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1.
Remove and save OE (Original equipment) air cleaner cover screw.
2.
If applicable, remove and discard stock air cleaner trim ring from front of air cleaner cover. Adhesive left on air cleaner cover can be removed with mineral spirits.
3.
See Figure 1. Install mounting bracket (2) with OE air cleaner cover screw saved in Step 1. Be sure to position one of the bracket arms at the 12 o'clock position.
4.
Tighten screw.
Torque: 3.4–6.8 N·m (30–60 in-lbs) ac screws
5.
Place the air cleaner cover (1) over the bracket aligning the five mounting holes.
6.
Secure the air cleaner cover to the bracket (2) with the 5 button head screws (3):
a.
Insert screws into the cover and start them into the threaded holes in the bracket.
b.
Working around the cover, partially tighten each screw. Continue until all five screws are seated.
c.
Tighten the screws.
Torque: 3.4–4.2 N·m (30–37 in-lbs) ac screws
7.
If removing the OE intake you must apply the provided Warning Label in a clearly visible area. We suggest attaching the sticker to the following:
a.
Softail: Right side lower fender
b.
Dyna: Right side swing arm.
c.
Touring/Trike: Inner primary topside or side cover.
SERVICE PARTS
Figure 1. Service Parts: Skull Air Cleaner Cover Shown
Table 1. Service Parts: Air Cleaner Cover
Item
Description (Quantity)
Part Number
1
Air cleaner cover (1)
Not Sold Separately
2
For Kit 27956-10, 29417-04, 29820-11, 29400366, 61300057, 61400049, 61400163, 61400167, 61400323
Bracket, mounting (5 hole)
29077-03
For Kit 61300058, 61400007, 61400009, 61400021, 61400052, 61400166, 61400170
Bracket, mounting (5 hole)
61400011
For Kit 61400019, 61400050, 61400164, 61400168
Bracket, mounting (5 hole)
12700026
3
For All Kits Except 29400366
Screws, button head (5)
94590-98
For Kit 29400366
Screws, torx, black oxide (5)
10200435