SCREAMIN' EAGLE 4.5 IN MUFFLER ENDCAP KITS
J062712018-09-01
GENERAL
Kit Numbers
65100076, 65100078, 65100084, 65100085, 65100095, 65100096, 65100097, 65100160, 65100161, 65100162, 65100163, 65100164, 65100165, 65100166
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 1 and Table 1.
Installation
1.
See Figure 1. Slide the three U-nuts (5) onto the bosses of the endcap retaining ring (4).
2.
Align the three U-nuts with the corresponding holes in the endcap (1, 2 or 3). Insert the endcap retaining ring (4) into the inside of the endcap.
3.
Insert the endcap and attachment ring into the muffler. Align the three U-nut holes with the holes in the muffler body.
NOTE
Failure to tighten screws alternately could cause a gap between endcap and muffler.
4.
Install three screws (6 or 7). Alternately tighten screws.
Torque: 9.5–12.2 N·m (7–9 ft-lbs)
5.
Repeat on other side.
NOTICE
Wipe all fingerprints off of exhaust system components after installation and before starting engine. Oil from hands can leave permanent marks on exhaust system finish. (00346a)
SERVICE PARTS
Figure 1. Service Parts, Muffler Endcap Kits
Table 1. Service Parts
Kit
Item
Description (Quantity)
Part Number
65100084
65100085
65100165
65100166
1
Endcap, muffler (2)
Not sold separately
5
U-nut (3)
8146
7
Cap screw, flat countersunk head, 1/4 in-20 x .73 in long
10200585
65100076
65100078
65100160
65100161
2
Endcap, muffler (2)
Not sold separately
4
Retaining Ring, muffler endcap
Not sold separately
5
U-nut (3)
8146
7
Cap screw, flat countersunk head, 1/4 in-20 x .73 in long
10200585
65100095
65100096
65100097
65100162
65100163
65100164
3
Endcap, muffler (2)
Not sold separately
4
Retaining Ring, muffler endcap
Not sold separately
5
U-nut (3)
8146
6
Cap screw, flat countersunk head, 1/4 in-20 x .63 in long
2225