Brake Pedal Pad Kit
J054262018-08-21
GENERAL
Kit Number
50600040, 50600159, 50600338, 50600340, 50600341
See Figure 1 below for a list of kit contents.
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
Separate purchase and installation of additional parts or accessories may be required for proper installation of this kit on your model motorcycle. See the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only) for a list of required parts or accessories for your model.
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation and is available from a Harley-Davidson dealer.
Figure 1. Generic Brake Pedal Kit Contents
Table 1. Service Parts
Item
Description
Part Number
1
Brake pedal assembly
Not Sold Separately
2
Washer (50600040)
6333
Washer (50600159, 50600338, 50600340, 50600341)
6421
3
Screw, button head
3340
INSTALLATION
1.
Remove and discard the previously installed brake pedal cover from the foot brake lever.
2.
Align the brake pedal assembly (1) over the lever as shown. Secure with screw (3) and washer (2).
3.
Tighten screw.
Torque: 13.5 N·m (10 ft-lbs) Screw, button head
WARNING
After repairing the brake system, test brakes at low speed. If brakes are not operating properly, testing at high speeds can cause loss of control, which could result in death or serious injury. (00289a)
4.
Verify brakes are operating properly.