RIDER FOOTBOARD KIT
J028312011-04-04
GENERAL
Kit Number
50631-04, 50500089
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
This kit is not compatible with Leather Rider Footboard Fringe Kit 50205-97 or 50206-98.
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
1.
Remove two shoulder bolts and locknuts attaching the existing footboard to the mounting brackets. Remove the footboard.
2.
Clean and inspect the footboard brackets. Replace if worn, rusted or damaged.
NOTE
For kit 50500089, re-use the original equipment mounting hardware when installing the footboards.
3.
See Figure 1. Install the appropriate footboard (1 or 2) in place over the mounting brackets. Line up the holes and install the shoulder bolts and locknuts. Tighten to 9–12 N·m (7–9 ft-lbs).
4.
Check that the footboard pivots freely.
5.
Repeat procedure for the opposite side.
SERVICE PARTS
Figure 1. Service Parts: Rider Footboards
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Footboard assembly, right
Not Sold Separately
2
Footboard assembly, left
Not Sold Separately
3
Shoulder bolt, 1/4-20 x 1-3/32 in (4 - not shown, only included in kit 50631-04)
50635-82B
4
Locknut, flanged, 1/4-20 (4 - not shown, only included in kit 50631-04)
7716