SISSY BAR UPRIGHT KITS (MINI or LOW)
J021572006-12-01
GENERAL
Kit Number
51124-01A, 51126-01A, 51145-04, 51150-04A, 51177-06, 51162-06, 51313-07
Kit Contents
Additional Parts Required
In addition to the kit components, separate purchase of fender baseplates is required. See Table 1 for information on the correct base plate kit requirements. Base plate kits are available from a Harley-Davidson dealer.
Table 1. Required Fender Baseplate
Kit Number
Base Plate
51124-01A (chrome, mini)
51120-01A (chrome)
51140-04A (gloss black)
51126-01A (chrome, low)
51120-01A (chrome)
51140-04A (gloss black)
51145-04A (gloss black, low)
51120-01A (chrome)
51140-04A (gloss black)
51150-04A (gloss black, mini)
51120-01A (chrome)
51140-04A (gloss black)
51162-06 (chrome, low)
51098-06 (chrome)
51156-06 (chrome
51120-07 (chrome)
51138-07 (chrome)
51220-07 (gloss black)
51177-06 (chrome, mini)
51098-06 (chrome)
51156-06 (chrome
51120-07 (chrome)
51138-07 (chrome)
51220-07 (gloss black)
51313-07 (gloss black, low)
51098-06 (chrome)
51156-06 (chrome
51120-07 (chrome)
51138-07 (chrome)
51220-07 (gloss black)
INSTALLATION
NOTE
It is not necessary to remove the seat or pillion to install these sissy bar upright kits.
1. If necessary, install Baseplate Kit following instructions included with kit.
1Upright
2Screws
3Baseplate
4Backrest Pad (Not in Kit)
Figure 1. Install Upright to Baseplate (Right Side of Low Upright Shown)
2. See Figure 1. Obtain the four button head cap screws (2) and the upright (1).
3. Using screws from kit, attach the left and right sides of the upright to the left and right sides of the baseplate.
4. Tighten screws to 10 N·m (7.4 ft-lbs).
SERVICE PARTS
Figure 2. Service Parts: Upright Kit (Mini shown)
Figure 3. Service Parts: Upright Kit (Low upright shown)
Table 2. Service Parts: All Models
Item
Description (Quantity)
Part Number
1
Upright
Not Sold Separately
2
Screw, M6-1 x 25 mm (4)
4474M