ROAD KING FORK LOCK COVER
J036822006-03-06
GENERAL
Kit Number
71790-05
Models
This kit fits 1994 and later FLHR motorcycles.
Kit Contents
Table 1. Fork Lock Cover Parts
Item
Description (Quantity)
Part Number
1
Gasket
Not Sold Separately
2
Assembly, fork lock cover
Not Sold Separately
3
Screw, flat, hex socket (2)
4637
4
Flat spring
Not Sold Separately
NOTE
At least once a year, apply a small amount of oil to the lock cover pivot screw in the hinge of the assembly.
INSTALLATION
1.
See Figure 1. At the handlebar cover, carefully pry under black plastic area of the lock plate and remove the lock plate. Discard the lock plate.
1Lock plate
2Pry location
Figure 1. Remove Fork Lock Plate
2.
See Figure 2. Remove and discard the two Phillips cover screws beneath the lock plate.
1Cover screws
Figure 2. Remove Cover Screws
3.
See Figure 3. Obtain the rubber gasket (4) and flat spring (3) from kit. Place the gasket over the mounting location and align the screw holes. Place the flat spring over the gasket and align the screw holes.
4.
See Figure 3. Obtain two chrome socket head screws (2) from kit. Place the cover assembly (1) into position, and install screws to secure cover.
1Cover assembly
2Cover screws
3Flat spring
4Gasket
Figure 3. Install Fork Lock Cover
Operation
Push the cover down to close.