7 Inch Headlamp Trim Ring
J013692014-02-05
GENERAL
Kit Number
69627-99, 69733-05, 61400293 and 61400295
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Table 1 and Figure 1.
Table 1. Kit Contents
Item
Description
Part Number
1
Screw
3824
2
Nut
8006
3
Trim ring
Not Sold Separately
INSTALLATION
1.
Loosen original equipment trim ring screw.
NOTE
If the original equipment trim ring screw is not loosened, the accessory trim ring will not fit properly.
2.
Slip new trim ring over original equipment trim ring. The lip on the back of the accessory ring should slip between headlamp housing and original equipment trim ring.
NOTE
See Figure 1. Screw and nut may need to be removed to allow trim ring to slip over original equipment trim ring. Position mounting screw of accessory trim ring at bottom of headlamp.
Figure 1. Headlamp Trim Ring
3.
Tighten original equipment ring screw.
4.
Tighten accessory trim ring screw.