Voltage Regulator Cover Kit
J005832006-04-11
GENERAL
Kit Number
74597-01
Models
This kit fits all 2001 and later Softail® models. Will also fit models equipped with bullet front spoiler, part number 57039-XX. Will not fit other Softail front spoilers.
Kit Contents
Table 1. Kit Contents
Description (Quantity)
Part Number
Cover
Not sold Separately
Spacers (2)
Not sold Separately
Screw, button head (2)
94404-93T
INSTALLATION
1.
Support the voltage regulator and remove the two regulator mounting screws. Discard screws.
2.
Insert the new screws (1) through the cover (2) mounting holes (3).
3.
Slide the spacers (4) over the screw ends on the inside of the cover.
4.
Position the assembly over the voltage regulator, align and tighten screws to 50-80 in-lbs (5.6-9.0 Nm).
1Screw (2)
2Cover
3Cover holes
4Spacers (2)
Figure 1. Voltage Regulator Cover Components