Skull Brake Pedal Pad Kits
J030902019-01-16
GENERAL
Kit Numbers
42710-04, 42711-04, 50600342, 50600343
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 1 and Table 1.
NOTE
A Service Manual for your motorcycle is available from any Harley-Davidson Dealer.
INSTALLATION
  1. Remove previously installed brake pedal cover from motorcycle.
  2. Position new brake pedal chrome cover (1) over brake pedal pad (2).
Large Brake Pedal
  1. Align assembled brake pad (items 1, 2, and 5) from kit to brake pedal and insert and tighten screw (4) through the washer (3), and into the chrome cover (1).
  2. Tighten screw to 19 ft-lbs (26 Nm).
Small Brake Pedal
  1. Align and install new cover and pad. Insert screw (4) through the washer (3), brake pedal and into brake pedal pad (2).
  2. Insert the screw (4) and washer (3) into the chrome cover.
  3. Tighten screw to 33 in-lbs (2.5 Nm).
Figure 1. Service Parts
Table 1. Service Parts
Item
Description (Quantity)
Part Number
SMALL - Brake Pedal Pad
1
Cover, brake pedal, chrome (Kit 42710-04)
Cover, brake pedal, satin black (Kit 50600342)
Not sold separately
2
Tread, Pad, brake pedal
Not sold separately
3
Washer, flat, offset
6716
4
Screw, hex socket, button head
3026
5
Small brake pedal
LARGE - Brake Pedal Pad
1
Cover, brake pedal, chrome (Kit 42711-04)
Cover, brake pedal, satin black (Kit 50600343)
Not sold separately
2
Tread, Pad, brake pedal
Not sold separately
3
Washer, flat, offset
6333
4
Screw, hex socket, button-head
3340
5
Screw, flat head (3)
4277
6
Large brake pedal