Accessory Footboard Inserts
J065062019-01-15
GENERAL
Kit Number
50500722, 50500718, 50500729, 50500732, 50501283, 50501284
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
This kit contains two foot board inserts.
There are no service parts available with this kit.
INSTALLATION
Remove Existing Footboard Inserts
1.
Apply liquid dishwashing soap to the footboard insert rubber bulbs protruding through the bottom of the footboard.
2.
Insert screwdriver into hole in underside of bulb and push bulb through footboard pan. Alternately, use a small screwdriver to work bulb through pan.
Install New Footboard Inserts
1.
Apply liquid dishwashing soap to the new footboard insert rubber bulbs.
2.
Place the footboard insert into position on the footboard.
3.
Use pliers to pull each rubber bulb into its footboard hole until the bulbs protrude through the footboard.
4.
Repeat the above steps for the remaining footboard insert.
SERVICE PARTS
Figure 1. Service Parts, Accessory Footboard Insert Kits (typical)
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
1
Footboard assembly, right
Not sold separately
2
Footboard assembly, left
Not sold separately