MIRROR KITS
J054142019-01-15
GENERAL
Kit Number
91315-04, 91657-02, 91696-05A, 91697-06A, 91965-98, 92096-05, 92190-06, 92398-09, 92410-09, 92416-08, 92423-08, 92441-10, 56000006, 56000090, 56000135, 56000136, 56000137, 56000171
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 2 , Table 1 , and Table 2.
INSTALLATION
XG Models
1.
See Figure 1. Remove mirror.
a.
Remove mirror (1).
b.
Remove tube nut (3).
c.
Remove mirror mount (4).
2.
See Figure 1. Install mirror.
a.
Install mirror mount (4). Tighten.
Torque: 11.7–14.3 N·m (104–127 in-lbs) Mirror mount
b.
Install tube nut (3) to mirror stem (2). Hand-tighten.
c.
Install mirror and tube nut to mirror mount. Hand-tighten.
d.
Adjust mirror (1).
e.
Tighten tube nut.
Torque: 11.7–14.3 N·m (104–127 in-lbs) Mirror tube nut
1Mirror
2Mirror stem
3Tube nut
4Mirror mount
Figure 1. Mirror
All Other Models
1.
Remove and discard the existing mirror. Discard any lockwashers and acorn nuts used to mount the original mirror.
2.
See Figure 2. Install flat washer (1) on mirror stud (top position) for all mirrors except Part No. 91696-05A, 92398-09 and 92410-09.
3.
For motorcycles with turn signals mounted to the underside of the hand lever housings (except 2004 and later XL models): Secure the left side mirror using only the lockwasher (2) and the acorn nut (3) from the kit.
4.
Secure the right side mirror with the lockwasher (2) and acorn nut (3) from the kit and the turn signal retainer only.
5.
For motorcycles with turn signals mounted away from the hand lever housings: Insert the mirror studs into the holes in the hand lever housings, and secure the mirrors with the flat washers (1) in top and bottom position, lockwashers (2) and acorn nuts (3) from the kit.
6.
Adjust mirrors for proper field of vision and tighten. Check adjustment and reposition if necessary.
NOTE
Harley-Davidson Motor Company cannot test, and make specific fitment recommendations concerning every possible mirror, and handlebar combination. Therefore, after installing new mirrors or handlebars, and before operating the motorcycle, check that the mirrors provide the operator a clear view to the rear.
a.
Airflow mirrors:
Torque: 10.8–16.3 N·m (8–12 ft-lbs) Airflow mirror acorn nut
b.
Other mirrors:
Torque: 13.5–18.9 N·m (10–14 ft-lbs) Mirror acorn nut, except Airflow
Mirror Pivot Adjustment
For 56000136, 56000137, 56000171
1.
See Figure 2. Adjust pivot tension.
a.
Incrementally torque adjustment screws (5) as required. Tighten.
Torque: 1.1–4 N·m (10–35 in-lbs) Mirror adjustment screw
b.
Check mirror pivot resistance and continue to torque as needed. Do not exceed 35 in-lbs.
SERVICE PARTS
Figure 2. Service Parts: Mirror Hardware
Figure 3. Service Parts: Pivot Mirror Kits Hardware
Table 1. Service Parts: Mirror Kits Hardware
Item
Description (Qty)
Silver
Black
1
Flat washer (4), For all other kits
6771A
6929
Flat washer, black (2), Kit 56000135, 56000171
12404
2
lockwasher (2)
7127
7155
3
Acorn nut (2), For all other kits
7736
8196
Acorn nut, black (2), Kit 56000135 Only
7352
Table 2. Service Parts: Mirror Kits
Kit Number
Description
Left Mirror (Item 4)
Right Mirror (Item 5)
91315-04
Skull
Not Sold Separately
Not Sold Separately
91657-02
Bullet
91928-03
91927-03
91696-05A
Tailfin
92176-05A
92175-05A
91697-06A
Profile Custom
92063-06A
92062-06A
91965-98
Aluminator
Not Sold Separately
Not Sold Separately
92096-05
Buckshot Chrome
91949-05
91987-05
92190-06
Split Vision
Not Sold Separately
Not Sold Separately
92398-09
Tribal Black
Not Sold Separately
Not Sold Separately
92410-09
Tribal Chrome
Not Sold Separately
Not Sold Separately
92416-08
Buckshot Black
92417-08
92419-08
92423-08
Dome Billet
92424-08
92426-08
92441-10
Edgecut Stem
Not Sold Separately
Not Sold Separately
56000006
Slipstream
Not Sold Separately
Not Sold Separately
56000090
Edge Cut Dome
Not Sold Separately
Not Sold Separately
56000135
Airflow, Black
56000125
56000126
56000136
Black
56000138
56000139
56000137
Bronze
56000146
56000147
56000171
Willie G Skull
Not Sold Separately
Not Sold Separately