DERBY COVER KIT
J066042019-01-15
GENERAL
Kit Number
25700934, 25700958, 25700959, 25700960, 25700961, 25700962, 25700963, 25700964, 25700965, 25700966, 25700967, 25700968, 25700969, 25700970, 25700971, 25700972, 25700973, 25700976, 25701023
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 2 and Table 1.
INSTALLATION
1.
Remove Original Equipment (OE) screws and washers and set aside.
2.
Inspect quad ring gasket and replace if necessary. Verify quad ring is properly seated in groove of primary cover.
3.
See Figure 2. Install new cover (1) and secure with screws (3) and washers (2).
NOTE
Kits 25700962, 25700963 and 25700964 have one longer screw that goes in the 2 o'clock position.
NOTE
If reusing OE screws, clean threads of screw and chase hole. Apply LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97) to screws.
4.
See Figure 2. Tighten screws in a star pattern.
Torque: 2.8–3.9 N·m (25–35 in-lbs)
NOTE
Kits 25700965 and 25700966 screw 10200659 should be torqued to 1.69–2.25 N·m (15–20 in-lbs).
Figure 1. Clutch Cover Tightening Sequence
SERVICE PARTS
Figure 2. Service Parts
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Cover, clutch
Not sold separately
2
Washer, flat (5)
Kits 25700958, 25700959, 25700965, 25700966, 25700969, 25700973, 25700961, 25700962
10300155
Washer, flat, black oxide (5)
Kits 25700963, 25700964, 25700967, 25700970, 25700971, 25700972, 25700976, 25701023
10300161
3
Screw, button head, Torx, chrome (5)
Kits 25700958, 25700959, 25700962 (4), 25700969, 25700973, 25700961
10200672
Screw, button head, Torx, chrome
Kit 25700962
10200714
Screw, button head, Torx, black zinc (4)
Kits 25700963, 25700964, 25700971 (5), 25701023
10200698
Screw, button head, Torx, blank zinc
Kits 25700963, 25700964
10200715
Screw, button head, Torx, black oxide (5)
Kits 25700967, 25700970, 25700972, 25700976
10200699
4
Screw, sockethead, stainless (6)
Kits 25700965, 25700966
10200659
Screw, sockethead, zinc (5)
Kits 25700965, 25700966
10200700
5
Medallion, chrome w/texture (not shown)
Kits 25700962, 25700963, 25700964
14100874
Medallion, bar & Shield, large (not shown)
Kit 25700967
14101000