7-INCH HEADLAMP BURST COLLECTION TRIM RING
J056392012-05-25
GENERAL
Kit Number
61400149
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
There are no service parts available for this kit.
Table 1. Kit Contents
Item
Description
Part Number
1
Screw, hex socket head, #6-32 x 0.50 in
Not Sold Separately
2
Trim Ring
Not Sold Separately
INSTALLATION
1.
Remove original equipment (OE) trim ring and screw.
2.
See Figure 1. Slip new trim ring (2) over OE headlamp housing. The lip on the back of the trim ring should slip between headlamp housing and the fairing.
3.
Position mounting screw (1) at bottom of headlamp.
4.
Tighten accessory trim ring screw to 1–1.7 N·m (9–15 in-lbs).
Figure 1. Burst Collection Trim Ring