Streamliner Shifter Peg Kit
J032992005-02-14
GENERAL
Kit Number
34967-04
Models
This kit is designed for installation on all model motorcycles.
NOTE
See Service Parts Illustration for kit contents. The shifter peg rubber tread and tread supports (large and small) will be assembled into the shifter peg casting.
Kit Contents
See Figure 1 and Table 1.
There are no Service Parts available with this kit.
INSTALLATION
NOTE
A Service Manual for your motorcycle is available at your Harley-Davidson Dealer. To enhance the Streamliner shifter pattern, orient the pegs as shown in the Service Parts Illustration.
WARNING
Be sure to follow manufacturer's instructions when using the UltraTorch UT-100 or any other radiant heating device. Failure to follow manufacturer's instructions can cause a fire, which could result in death or serious injury. (00335a)
  • Avoid directing heat toward any fuel system com ponent. Extreme heat can cause fuel ignition/explosion resulting in death or serious injury.
  • Avoid directing heat toward any electrical system component other than the connectors on which heat shrink work is being performed.
  • Always keep hands away from tool tip area and heat shrink attachment.
  1. If needed, apply heat with a heat gun to shift lever treads and treads on shifter peg to aid peg removal. Remove and discard existing shifter peg.
  2. Using a button head cap screw (3), attach assembly to shift lever. Tighten screw to 12-14 ft-lbs (16.3-19 Nm).
  3. NOTE
    See Service Parts illustration. Screw (3) has a lock patch to prevent loosening.
    NOTE
    If the button head cap screw must be removed after installation of the assembly, apply Loctite® 243 (blue) (Harley-Davidson part number 99642-97) to threads before installing screw.
SERVICE PARTS
Figure 1. Service Parts: Streamliner Shifter Peg Kit
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
1
Casting, Streamliner shifter peg
Not Sold Separately
2
Tread, shifter peg
34970-04
3
Screw, button head cap
4373
4
Tread support, small
33953-05
5
Tread support, large
33954-05