BRAKE PEDAL PAD KIT
J065112019-08-21
Table 1. General Information
Kits
Suggested Tools
Skill Level(1)
Time
Pedal Kits: 50600266, 50600267, 50600268,50600269, 50600346, 50600347
Trim Kits: 50600290, 50600291, 50600292, 50600293, 50600294, 50600295, 50600296, 50600297, 50600365, 50600366, 50600367, 50600368
Safety Glasses, Torque Wrench
1 h
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Brake Pedal Pad Components
Table 2. Kit Contents: Brake Pedal Pad Components
Item
Qty
Description
Part No.
Notes
1
1
Brake pedal pad, large, Kits 50600266, 50600268, 50600346, 50600347, 50600365, 50600366, 50600367, 50600368
Not sold separately
Brake pedal pad, small, Kits 50600267, 50600269
Not sold separately
2
1
Trim, brake pedal pad, large, Kits 50600266, 50600268, 50600346, 50600347, 50600365, 50600366, 50600367, 50600368
Not sold separately
Trim, brake pedal pad, small, Kits 50600267, 50600269
Not sold separately
3
2
Screw, button head, Kits 50600266, 50600267, 50600268, 50600269
50600323
Torque: 1.7 - 2.3 Nm (15 - 20 in-lbs)
Screw, button head, Kits 50600346, 50600347
10200662
Torque: 1.7 - 2.3 Nm (15 - 20 in-lbs)
4
1
Insert, brake pedal pad, large, Kits 50600266, 50600268, 50600346, 50600347
Not sold separately
Insert, brake pedal pad, small, Kits 50600267, 50600269
Not sold separately
5
1
Washer, Kits 50600266, 50600267, 50600268, 50600269
12408
Washer, Kits 50600346, 50600347
6333
6
1
Screw, socket head, Kits 50600266, 50600267, 50600268, 50600269, 50600346, 50600347
10200663
Torque: 26 Nm (19 ft-lbs)
Items mentioned in text, but not included in kit.
A
Foot brake lever
NOTE
Verify all contents are present in the kit before installing or removing items from vehicle.
GENERAL
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Verify that the most current version of the instruction sheet is used. It is available at: www.harley-davidson.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
REMOVE
1. Remove previously installed brake pedal cover from foot brake lever (A).
INSTALL
1. See Figure 1. Align and slide new brake pedal pad (1) and insert (4) over the end of foot brake lever (A).
2. Assemble plain washer (5) and screw (6).
3. Thread screw (6) through hole in foot brake lever (A) and into back of brake pedal pad (1). Tighten.
Torque: 26 N·m (19 ft-lbs)
REPLACE TRIM or WEAR PEG
1. See Figure 1. Remove screws (3).
2. Replace trim or wear peg (2) as applicable.
3. Apply one drop of threadlocker to screws (3).LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97)
4. Install screws (3). Tighten.
Torque: 1.7–2.3 N·m (15–20 in-lbs)