AIR CLEANER COVER
J033152019-08-21
Table 1. General Information
Kits
Suggested Tools
Skill Level*
Time
27956-10, 29417-04, 29820-11, 29400366, 61300057, 61300058, 61301027, 61400007, 61400009, 61400019, 61400021, 61400049, 61400050, 61400052, 61400163, 61400164, 61400166, 61400167, 61400168, 61400170, 61400323
Safety Glasses, Torque Wrench
1 h
(1) *Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Air Cleaner Cover
Table 2. Kit Contents List: Air Cleaner Cover
Item
Qty
Description
Part No.
Notes
1
1
Air cleaner cover
Not sold separately
2
1
Bracket, mounting (5 hole)
29077-03
Kits 27956-10, 29417-04, 29820-11, 29400366, 61300057, 61301027, 61400049, 61400163, 61400167, 61400323
1
Bracket, mounting (5 hole)
61400011
Kits 61300058, 61400007, 61400009, 61400021, 61400052, 61400166, 61400170
1
Bracket, mounting (5 hole)
12700026
Kits 61400019, 61400050, 61400164, 61400168
3
5
Screw, Torx™, button head, chrome
94590-98
All kits except 29400366
3.4–4.2 N·m (30–37 in-lbs)
5
Screw, Torx™, button head, black oxide
10200435
Kit 29400366 only
3.4–4.2 N·m (30–37 in-lbs)
5
Screw, Torx™, button head, chrome
10200894
Kit 61301027 only
3.4–4.2 N·m (30–37 in-lbs)
Items below are not included in kit but are referenced in text:
A
Original Equipment buttonhead screw
3.4–6.8 N·m (30–60 in-lbs)
B
Original Equipment air cleaner cover
NOTE
Verify all contents are present in the kit before installing or removing items from vehicle.
GENERAL
Models
See the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only) for model fitment information.
Verify use of most current version of instruction sheet at: www.harley-davidson.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
INSTALL
1. See Figure 1. Remove and save Original Equipment (OE) air cleaner cover screw (A).
2. Install mounting bracket (2) with screw (A).
a. Position a bracket arm at the 12 o'clock position.
b. Tighten screw (A).
Torque: 3.4–6.8 N·m (30–60 in-lbs)
3. Install air cleaner cover (1) to bracket (2).
a. Align holes in cover with holes in bracket.
b. Install and partially tighten each screw (3).
c. Tighten screws (3) in a star pattern.
Torque: 3.4–4.2 N·m (30–37 in-lbs)
4. If OE intake is removed, apply Warning Label (if included) in a clearly visible area. Harley-Davidson suggests attaching the sticker to the following:
a. Softail: Right side lower fender
b. Dyna: Right side swing arm.
c. Touring/Trike: Inner primary topside or side cover.