ENDGAME COLLECTION RIDER FOOTBOARD - SOFTAIL
J067762020-01-14
GENERAL INFORMATION
Table 1. General Information
Kits
Suggested Tools
Skill Level(1)
Time
50501679, 50501648
Safety Glasses, E-Clip tool
1 h
(1) Tightening to torque value or other moderate tools and techniques required
KIT CONTENTS
Figure 1. Kit Contents: Endgame Collection Rider Components
Table 2. Kit Contents: Endgame Collection Rider Components
Item
Qty
Description
Part No.
Notes
1
2
Footboard Assembly, rider, graphite
50502097
Footboard Assembly, rider, black
50502098
NOTE
Verify that all contents are present in the kit before installing or removing items from vehicle.
GENERAL
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Verify that the most current version of the instruction sheet is used. It is available at: www.harley-davidson.com/isheets
Contact Harley-Davidson Customer Support Center at 1-800-258-2464 (U.S. only) or 1-414-343-4056.
Installation Requirements
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
REMOVE
1. See Figure 2. Remove E-clip (3), clevis pin (1) and return torsion spring (2).
2. Remove footboard.
3. Save hardware for new footboard installation.
4. Clean and inspect footboard brackets.
5. Replace if worn, rusted or damaged.
INSTALL
1. See Figure 2. Install footboard.
a. Insert short end of torsion spring (2) into forward most hole in footboad.
b. While holding torsion spring (2) in place, install footboard and torsion spring onto mounting bracket.
c. Install clevis pin (1).
d. Install E-clip (3).
e. Rotate footboard up and push torsion spring (2) into slot on mounting bracket.
2. Check that footboard pivots freely on clevis pin (1).
3. Repeat for opposite side.
1Clevis pin
2Torsion spring
3E-clip
Figure 2. Rider Footboard Kit