LARGE BRAKE PEDAL KIT
J063482021-08-02
GENERAL
Kit Number
50600179, 50600185, 50600186, 50600463, 50600464, 50600465
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 1 and Table 1.
REMOVE
1. See Figure 1. Remove and discard previously installed brake pedal cover from foot brake lever.
INSTALL
1. Align pad assembly over foot brake pedal (3) as shown.
2. Apply threadlocker to screw (5).LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97)
3. Assemble plain washer (4) and screw (5).
4. Thread screw through hole in brake lever and into back of pad.
5. Tighten screw
Torque: 13.56 N·m (10.0 ft-lbs)
Figure 1. Service Parts
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Pad
Not sold separately
2
Pad housing
Not sold separately
3
Brake pedal original equipment
4
Washer
6333
5
Button head capscrew
4278
Button head capscrew, (Kits 50600463, 50600464, 50600465)
10201226