0/0
BRAKE CALIPER INSERT (DISHED)
J025042005-03-25
GENERAL
Kit Number
44542-03
Models
This kit fits front and rear brake calipers on 2000 and later models (except Springer® front calipers, 2004 and later XL models and 2006 and later VRSC model motorcycles).
Kit Contents
This kit contains one insert, brake caliper-dished, Part Number 44542-03.
There are no Service Parts available with this kit.
INSTALLATION
NOTE
Leave the current caliper insert installed.
  1. Clean the existing caliper insert thoroughly with a soft cloth dampened with rubbing alcohol.
  2. Remove the adhesive backing from the new caliper insert and hold it in place over the existing caliper insert. Press the new insert firmly to activate the adhesive.