0/0
Aluminator Emblem Installation/ Axle Nut Cover (Springer)
J001162006-05-08
GENERAL
Kit Number
43909-94
Models
This kit fits 1988-2006 FXST Springer models and models with Springer Kit, Part Number 46007-88A (does not fit FLSTS).
NOTE
This Bar & Shield emblem is packaged loose to allow precise final positioning on an accessory after the accessory has been installed.
INSTALLATION
  1. The accessory part should be installed, clean, and free of oil and grease.
  2. Peel backing off of the emblem.
  3. Carefully position and place emblem in the round counterbore.