Solenoid Cover Kit
J034192006-05-06
GENERAL
Kit Number
31798-04
Models
This kit fits 1999 to 2006 Twin Cam models (except 2006 and later Dyna), 1990 to 2006 Evolution 1340 models, 1995 and later XL883 and 1991 and later XL 1200 models. (Does not fit with Vent Hose Cover Kit, Part Number 37961-02.)
NOTE
A Service Manual for your model motorcycle is available from a Harley-Davidson Dealer.
INSTALLATION
WARNINGTo prevent accidental vehicle start-up, which could cause death or serious injury, disconnect battery cables (negative (-) cable first) before proceeding. (00307a)
WARNINGDisconnect negative (-) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00049a)
| 1. | Disconnect battery cables, negative (-) cable first. | |
| 2. | Remove screws from solenoid cover plate and discard. | |
| 3. | Install new solenoid cover plate and screws from kit over the existing cover plate. | |
| WARNING Connect positive (+) battery cable first. If positive (+) cable should contact ground with negative (-) cable connected, the resulting sparks can cause a battery explosion, which could result in death or serious injury. (00068a) | ||
| 4. | Connect battery cables, positive (+) cable first. |
SERVICE PARTS
Figure 1. Service Parts: Solenoid Cover
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Solenoid cover | Not sold separately |
2 | Screw, M4 - 0.7 x 12mm long with lockpatch (3) | 1075M |