1. | Remove existing footpeg and attaching hardware. Remove chrome swing arm pivot covers, if so equipped. Do not remove tool box, if so equipped. NOTE Some paint removal from counter bore holes of footboard support may be necessary to ease installation of the pivot pins. | |
2. | Install footboard mounts as follows: a. Position footboard mount (5) and insert socket head capscrew (8) through part and into footpeg mounting hole. b. Position semi-circular cut-out in mount extending from side of mount around nut of swing arm pivot bolt. c. Tighten footboard mounting screw (8) to 61–67.8 N·m (45–50 in-lbs). | |
3. | Position footboard support (3) on mounting stud so that bolt hole aligns with machined groove in stud. | |
4. | Insert screw (9) through left side in split hub of footboard support (3). Thread into tapped hole (right side) of split hub. | |
5. | Tighten screw (9) to torque of 13.5 N·m (120 in-lbs). |
1. | Remove existing footpeg and footpeg mount. | |
2. | See Figure 1. Position footboard mount (6) onto muffler support bracket. | |
3. | Secure mount with screw (7) tightening to 47–61 N·m (35–45 ft-lbs). |
Kit 50400-05 | Kit 50399-05 | |||||
---|---|---|---|---|---|---|
Item | Description (Quantity) | Part Number | Item | Description (Quantity) | Part Number | |
1 | Steel ball (2) | 8860 | 1 | Steel ball (2) | 8860 | |
2 | Spring (2) | 33085-74 | 2 | Spring (2) | 33085-74 | |
3 | Left hand footboard mount | 50483-00 | 3 | Left hand footboard mount | 50483-00 | |
4 | Pivot pin (4) | 50933-86 | 4 | Pivot pin (4) | 50933-86 | |
5 | Support footboard | 52713-95A | 5 | Support footboard | 52713-95A | |
6 | Right hand footboard support | 50403-05 | 6 | Right hand footboard support | 50402-05 | |
7 | Screw | 4355B | 7 | Screw | 4314 | |
8 | Screw | 4310 | 8 | Screw | 4310 | |
9 | Screw | 3601 | 9 | Screw | 3601 |