1. | Clean rear master cylinder cover, then remove two screws that hold the cover in place. | |
2. | See Figure 1. Replace the original cover, sight glass and gasket with new cover (2), sight glass and gasket (3). NOTE The cover is labled for D.O.T. 5 SILICONE BRAKE FLUID. Install this cover on reservoirs filled only with D.O.T. 5 SILICONE BRAKE FLUID. Do not mix grades of brake fluid. as they are not compatible and could cause equipment damage. | |
3. | Install the polished stainless steel cover screws (1) and tighten screws to 0.7–0.9 N·m (6–8 in-lbs). |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Screws (2) | 2573 |
2 | Cover, reservoir assembly | Not Sold Separately |
3 | Gasket | 42568-05 |