1. | Clean rear master cylinder cover, then remove two screws that hold cover in place. | |
2. | Remove original cover (with sight glass) and gasket. | |
3. | Put new cover and gasket in position. | |
4. | Install cover screws and tighten screws (1) to 0.7–0.9 N·m (6–8 in-lbs). |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Screws (2) | 2573 |
2 | Cover, reservoir assembly | Not sold separately |
3 | Gasket | 42568-05 |
Note: Item 2, Chrome Rear Master Cylinder Cover Assembly includes the reservoir cover, gasket and sight glass. The gasket, part number 42568-05 can be purchased separately from any Harley-Davidson dealer. |