0/0
Chrome Skull Fender-Tip Lens Kit
J022202013-11-01
GENERAL
Kit Number
59651-01
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
Table 1. Kit Contents
Item
Description (Quantity)
1
Front fender-tip lens (amber) (1)
2
Rear fender-tip lens (red) (1)
1Notch
2Top tab
3Bottom tab
Figure 1. Fender-Tip Lens
INSTALLATION
NOTE
Cover the screwdriver blade with tape to prevent scratching the lens.
  1. Press a screwdriver into the top-center notch on the stock fender-tip lens and pull away from the fender to remove the lens.
  2. Place the bottom tab of the amber skull lens in the groove in the lower fender-tip lamp housing.
  3. Press a screwdriver into the top-center notch on the fender-tip lens, then push the lens top tabs into the lens housing.
  4. Repeat steps 1 through 3 for the rear (red) fender-tip lens.