Description (Quantity) | Part Number |
---|---|
Transmission dipstick assembly | Not sold separately |
O-ring | 11132A |
Medallion (Chrome dipstick only) | 14448-94 |
1. | Remove existing dipstick assembly. | |||||||
2. | See Figure 1. Make sure the O-ring (2) is firmly seated on dipstick assembly (1) as shown. | |||||||
3. | Install new dipstick assembly in same location as original dipstick assembly. Hand-tighten. | |||||||
4. | After installation as described in Step 3, remove the backing from the medallion (3) if present. Apply the medallion in the desired orientation to the recessed area as shown. |
Figure 1. Transmission Dipstick Kit Assembly |