0/0
Chrome Front Master Cylinder Cover Kit
J029502013-11-01
GENERAL
Kit Number
42313-04
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
NOTICE
Do not allow dirt or debris to enter the master cylinder reservoir. Dirt or debris in the reservoir can cause improper operation and equipment damage. (00205c)
  1. Clean the front master cylinder cover, then remove and discard the two screws that hold the cover in place.
  2. Remove and discard the original cover and gasket, and place the new diaphragm and plate onto the master cylinder reservoir. Position the new chrome cover onto the reservoir over the diaphragm.
  3. Install the new polished stainless steel cover screws and tighten to 9-17 in-lbs (1.0-.2.0 Nm).
Figure 1. Service Parts
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Cover, master cylinder reservoir
Not sold separately
2
Decal, warning
44791-04
3
Gasket kit (includes items 4 and 5)
42805-04
4
Plate, diaphragm
Not sold separately
5
Diaphragm
Not sold separately
6
Screw (2)
2498