Chrome Front End Kit
J013382006-10-09
GENERAL
Kit Number
46224-00
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references Service Manual information. A Service Manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
NOTE
We recommend this kit be installed by a factory trained technician at an authorized Harley-Davidson Dealer.
Kit Contents
See Figure 1 and Table 1.
NOTE
Harley-Davidson has designed and manufactured this front end according to our very stringent and well-tested standards. Do not modify the FXST/FXSTB front end in any way that changes our original design.
NOTE
Do not install this front end kit on any non-approved motorcycle. Do not install on three-wheeled vehicles of any kind.
NOTE
DO NOT use front end components that have been remanufactured (straightened, plated, welded) in any way. There can be no certainty that remanufactured front end components will have the strength of the original, unchanged components.
INSTALLATION
Front Forks
Refer to the applicable Service Manual for Front Fork Assembly and Installation procedures.
Steering Head Bearing Adjustment
Refer to the applicable Service Manual for Steering Head Bearing Adjustment procedures.
SERVICE PARTS
Figure 1. Service Parts: FXST/FXSTB Front End Kit
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
Item
Description (Quantity)
Part Number
1
Lockwasher (2)
7039
11
Nut
45718-60
2
Spacer (2)
5710
12
Lockwasher
45717-63
3
Front axle cover kit
43899-86A
13
Triple clamp, upper
45672-80A
4
Lower triple clamp cover
45685-93
14
Lockwasher (2)
45717-63
5
Cover, upper dust
48361-80
15
Triple clamp, lower, assembly
45640-00
6
Bearing
48345-60
16
Screw (2)
94603-98
7
Nut, bearing
48332-48B
17
Fork stem/slider tube cap cover kit
45002-98
8
Bolt, pinch (2)
4729
18
Reflector, amber, left
59482-00
9
Shock, right, fork assembly
46226-00
19
Reflector, amber, right
59481-00
10
Shock, left, fork assembly
46225-00