FLT REAR MASTER CYLINDER COVER KIT
J017012007-09-27
GENERAL
Kit Number
45318-99
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
INSTALLATION
| 1. | See Figure 2. Using screw (5) and washer (4), loosely install bracket (3) to cover (2). Finger tighten. | |
| 2. | See Figure 1. Remove TORX® T40 screw from lower engine guard at location shown. | |
| 3. | Slip master cylinder cover over master cylinder and align hole in bracket with hole in engine guard. | |
| 4. | Install TORX T40 screw through cover bracket and engine guard and tighten to 16.3–20.3 N·m (12–15 ft-lbs). | |
| 5. | Tighten master cylinder cover screw (5) securely. |
| 1 | T40 TORX screw |
Figure 1. Lower Engine Guard TORX Screw
SERVICE PARTS
Figure 2. Service Parts: Master Cylinder Cover Kit
Table 1. Service Parts: Master Cylinder Cover Kit
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Cover pad | Not Sold Separately |
2 | Master cylinder cover | Not Sold Separately |
3 | Mounting bracket | Not Sold Separately |
4 | Lockwasher, spring | 94081-90T |
5 | Button head screw | 94396-92T |