0/0
Console Washer
J013702013-11-01
GENERAL
Kit Numbers
94753-99
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
Table 1. Kit Contents
Description
Part Number
Console washer
Not sold
Screw, 3/4 in., used on FLHR only
Not sold
Screw, 1 in., used on Softail only
Not sold
Bar and Shield hole plug
94754-99
NOTE
All Service Parts available for this kit are listed above.
INSTALLATION
1994 and later Road King Models
  1. See Figure 1. Remove the stock washer and bolt from the location shown. Discard hardware.
  2. Install new console washer with 3/4 inch screw as shown.
  3. Snap bar and shield hole plug into place over screw head.
1984 and later Softail Models
  1. See Figure 2. Remove the stock washer and bolt from the location shown. Discard hardware.
  2. Install new console washer with 1 inch screw as shown.
  3. Snap bar and shield hole plug into place over screw head.
1Bar and shield hole plug
23/4 in. screw
3Console washer
Figure 1. Installation on FLHR Instrument Panel
1Bar and shield hole plug
21 in. screw
3Console washer
Figure 2. Installation on Softail Tank Panel