Voltage Regulator Cover Kit
J005832006-04-11
GENERAL
Kit Number
74597-01
Models
This kit fits all 2001 and later Softail® models. Will also fit models equipped with bullet front spoiler, part number 57039-XX. Will not fit other Softail front spoilers.
Kit Contents
Table 1. Kit Contents
Description (Quantity) | Part Number |
|---|---|
Cover | Not sold Separately |
Spacers (2) | Not sold Separately |
Screw, button head (2) | 94404-93T |
INSTALLATION
| 1. | Support the voltage regulator and remove the two regulator mounting screws. Discard screws. | |||||||||
| 2. | Insert the new screws (1) through the cover (2) mounting holes (3). | |||||||||
| 3. | Slide the spacers (4) over the screw ends on the inside of the cover. | |||||||||
| 4. | Position the assembly over the voltage regulator, align and tighten screws to 50-80 in-lbs (5.6-9.0 Nm). | 
Figure 1. Voltage Regulator Cover Components |