1. | See Figure 1. Remove windshield. | |
2. | Remove all hardware that secures mounting brackets to windshield. The nine screws must be removed with a T-27 TORX® screwdriver. Save all hardware and brackets for installing new windshield. | |
3. | Remove all old tape from brackets and apply new tape (Items 1 and 2) from kit onto brackets. Align holes in tape with holes in brackets. NOTE A hair dryer may be used to aid in tape removal from brackets. If original windshield does not use rubber washers, go to Step 5. | |
4. | Install rubber washers (4) between inner vertical brace and windshield. NOTE Do not over tighten fasteners. Over tightening can crack the windshield. | |
NOTICE Do not exceed recommended torque when installing mounting screws. Damage to windshield can result. (00385a) | ||
5. | Install all brackets. Tighten all screws and acorn nuts to 5.4–6.8 N·m (48–60 in-lbs). | |
6. | Install windshield (3) on motorcycle. |
Kits | Models | Fits Accessory Kit: |
---|---|---|
57201-05 | Smoked, low profile | 57199-05 |
57717-01 | Smoked, standard height | 57715-01 |
57718-01 | Clear, standard height | 57716-01 |
57719-08 | Clear, standard height | 57701-08 |
57720-08 | Smoked, low profile | 57702-08 |
57762-10 | Standard, clear | 58053-10 |
57763-10 | Smoked, low profile | 57682-10 |
57812-04 | Clear with flames | 57810-04 |
57815-04 | Clear with flames | 57813-04 |
57912-04 | Clear with flames | 57898-04 |
58061-96 | Clear, standard height | 58001-71E, 58006-87C, 58034-96, 58112-96, |
58103-96 | Smoked, low profile | 58001-71E, 58006-87C 58034-96, 58112-96, |
58264-03 | Smoked, standard height | 58865-03, 58880-03 |
58265-03 | Clear, standard height | 58865-03, 58880-03 |
58271-95 | Smoked, low profile | 58340-96, 58341-96 |
58288-95 | Clear, standard height | 58340-96, 58341-96 |
58358-96 | Clear, standard height | 58357-96, 58367-96 |
58368-96 | Smoked, low profile | 58357-96, 58367-96 |
58625-99 | Smoked, standard height | 58056-94A, 58626-99 |
58629-99 | Smoked, standard height | 58627-99 |
58632-99 | Clear, standard height | 58044-88B |
58750-05 | Clear, standard height | 59802-05 |
58774-08 | Clear, standard height, cutout for auxiliary lamp | 57605-08, 57609-08 |
58777-05 | Smoked, standard height | 58751-05 |
58804-96 | Clear, standard height | 58770-96, 58771-96 |
58805-96 | Smoked, low profile | 58770-96, 58771-96 |
58916-98A | Clear, standard height | 58059-93A |
58917-98A | Clear, standard height | 58025-91B |
Item | Description (Quantity) | Part Number |
---|---|---|
All kits except 58774-08: | ||
1 | Tape for horizontal brace (2) | 58052-78 |
2 | Tape for vertical brace (2) | 58417-77 |
3 | Windshield | Not sold separately |
4 | Rubber washer (6) | 58152-96 |
Kit 58774-08: | ||
1 | Tape for horizontal brace (2) | 58052-78 |
2 | Tape for vertical brace (2) | 58415-08 |
3 | Windshield | Not sold separately |
4 | Rubber washer (6) | 58152-96 |