0/0
Softail Frame Trim Plates
J006072013-11-01
GENERAL
Kit Numbers
47300-88T
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
INSTALLATION
  1. Use isopropyl alcohol to remove dirt, grease, and wax from the trim-plate locations on the frame.
    2. NOTE
    The upper-left trim plate must be bent to conform to the surface of the depression prior to installation.
  2. See Figure 1. Fasten the adhesive backing (2), provided, to the unpolished side of the trim plates (1).
  3. Center the trimplates in the depressions and press them firmly into position for one minute.
1Trim plates
2Adhesive backing
Figure 1. Trim Plates