0/0
CHROME SPORTSTER SWINGARM
J032892006-10-26
GENERAL
Kit Number
48434-05
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references Service Manual information. A Service Manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
Kit Contents
See Figure 1 and Table 1.
Table 1. Service Parts
Item
Description (Quantity)
Part Number
1
Swingarm, chrome
Not Sold Separately
2
Label, battery warning
15368-01A
INSTALLATION
  1. Remove stock rear fork (swingarm). Refer to REAR FORK, REMOVAL, in Service Manual.
  2. Remove bearings from existing swingarm and install in chrome swingarm (1). Refer to REAR FORK, DISASSEMBLY and ASSEMBLY in Service Manual.
  3. Apply battery warning label (2) to swingarm at location (A).
  4. Install new swingarm assembly. Refer to REAR FORK, INSTALLATION in Service Manual.
SERVICE PARTS
See Figure 1 and Table 1.
Figure 1. CHROME SWINGARM KIT