1. | Remove and discard the original voltage regulator mounting screws. | |
2. | See Figure 1. Place a chrome washer (4) onto each of the button head screws (5) from the kit. Insert the screws into the mounting holes in the new voltage regulator cover (1). Place first a spacer (2), then a Nylon washer (3) over the screw threads on the inside of the cover. | |
3. | Fasten the cover through the voltage regulator into the motorcycle frame. Tighten to 6.8–9 N·m (60–80 in-lbs). |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Regulator cover | Not Sold Separately |
2 | Spacer, 1.0 inch (25 mm) long (2) | Not Sold Separately |
3 | Washer, Nylon (2) | 62917-01 |
4 | Washer, Chrome (2) | Not Sold Separately |
5 | Screw, button head, hex socket 1/4-20 x 2-1/4 inch long (2) | Not Sold Separately |