CHROME OIL FILLER SPOUT
J035962005-05-12
GENERAL
Kit Number
62511-06
Models
This kit fits 2006 and later Dyna models.
INSTALLATION
| 1. | See Figure 1. Remove oil filler cap from from oil filler spout (1). | |
| 2. | Remove screw and washer from the oil fill spout (1), while carefully removing parts from transmission housing. Install O-ring onto chrome oil filler spout. | |
| 3. | Replace the oil filler spout (1) on transmission housing with new chrome parts from kit, being careful to place washer (4) over the screw (3) and align the screw with hole in transmission housing. Tighten screw to 9.5–12.2 N·m (7–9 ft-lbs). | |
| 4. | Replace the filler cap in the oil filler spout. |
SERVICE PARTS
Figure 1. Service Parts: Chrome Oil Filler Spout
Table 1. Service Parts: Chrome Oil Filler Spout
Item | Description (Quantity) | Part Number |
|---|---|---|
1 | Chrome oil filler spout | Not Sold Separately |
2 | O-ring | 11573 |
3 | Screw | 94570-98 |
4 | Washer | 6287 |