INSTALLATION
Refer to the appropriate Service Manual for wheel removal and installation procedures.
See
Figure 1. This kit contains the necessary parts for wheel installation, however, you will need to save the Axle, Axle Nut, Brake Disc, Cotter Pin (or Spring Clip) and the Drive Pulley with related hardware for reinstallation.
NOTE
Apply two drops of Loctite® Threadlocker 262 (red) to each of the five sprocket mounting bolts. Follow the bolt torque procedure in your service manual or, if installing an accessory hardware kit, in the I-sheet included with the hardware kit.
NOTICE
Do not re-use brake disc/rotor screws. Re-using these screws can result in torque loss and damage to brake components. (00319c)
SERVICE PARTS
Figure 1. Service Parts: 16 inch, 13 Spoke Chrome Rear Wheel Kits
Table 1. Service Parts: 16 Inch, 13 Spoke Chrome Rear Wheel Kits
Kit | Item | Description (Quantity) | Part Number |
|---|
Kit 40844-05 | 1 | Bearing 3/4 in. (2) | 9267 |
2 | Bearing spacer sleeve, 3/4 in. | 43608-00 |
3 | Custom wheel | Not Sold Separately |
4 | Valve stem assembly | 43157-83A |
5 | Rim label (not shown) | Not Sold Separately |
6 | Brake disc | Reference Only |
7 | Brake disc screws (5) | 43567-92 |
Kit 40845-05 | 1 | Bearing assembly, 1.0 in. (2) | 9247 |
2 | Bearing spacer sleeve, 1.0 in. | 43517-00 |
3 | Custom wheel | Not Sold Separately |
4 | Valve stem assembly | 43157-83A |
5 | Rim label (not shown) | Not Sold Separately |
6 | Brake disc | Reference Only |
7 | Brake disc screws (5) | 43567-92 |