This kit fits all 1999 through 2005 Electra Glide model motorcycles with passenger handrail.
Kit Contents
See Figure 1 for a list of the kit contents. No Service Parts are available for this kit.
INSTALLATION
NOTE
The passenger handrail grips are side-specific. Install the grips so that the Bar-and-Shield logo is oriented properly.
See Figure 1. Obtain a rubber grip insert (4) from the kit.
Open up the rubber insert along the horizontal split (A), and fit it over the forward curve of the handrail. Ensure that the insert is positioned to fit the curve properly, with no kinks or gaps.
Obtain an inner grip (1), the correct-side outer grip (2 or 3), and six screws (5) from the kit.
Position the inner and outer grips over the insert, pressing them firmly together and lining up the holes.
Insert a screw through one of the holes in the inner grip, and carefully thread part way into the mating hole in the outer grip. Repeat for the remaining five screws.
Use the hex socket wrench (6) provided to tighten all six screws securely.