ENGINE GUARD FOOTPEG BILLET MOUNTING KIT
J024582011-11-15
GENERAL
Kit Number
50957-02B, 54234-10
Models
For model fitment information, see the P&A Retail Catalog or the Parts and accessories section of www.harley-davidson.com.
Additional Parts Required
This kit requires installing a set of footpegs, sold separately and available from a Harley-Davidson dealer.
This kit requires installing Footpeg Bolt Kit 94133-01, sold separately and available from a Harley-Davidson dealer.
This kit requires LOCTITE® 243 Threadlocker and Sealant - Blue (99642-97), sold separately and available from a Harley-Davidson dealer.
INSTALLATION
| 1. | See Figure 1. Position a footpeg mount (3) and clamp (1) on the engine guard. Position the footpeg mount (3) to allow the footpegs to fasten on the inboard side of the engine guard. | |
| 2. | Apply LOCTITE® 243 (blue) to two screws (4). | |
| 3. | Use the screws from Step 2 to fasten the footpeg mount in a comfortable location on the engine guard. Hand tighten each screw. Alternate between screws when tightening until each screw has reached a torque of 19 N·m (14 ft-lbs). | |
| 4. | Install a footpeg, sold separately, using the spring washer (2), and bolt and locknut (from kit 94133-01). Position the spring washer inside the footpeg mount with the square edge toward the inside of the mount. Tighten locknut to 26 N·m (19 ft-lbs). | |
| 5. | Repeat Steps 1-4 on the other side of the motorcycle. |
SERVICE PARTS
Figure 1. Service Parts: Engine-Guard Footpeg Billet Mounting Kit
Table 1. Service Parts Table
Kit | Item | Description (Quantity) | Part Number |
|---|---|---|---|
50957-02B | 1 | Clamp (2) | 51009-02A |
2 | Spring washer (2) | 50912-72 | |
3 | Billet footpeg mount (2) | 50988-02A | |
4 | Socket head screw (4) | 4617 | |
54234-10 | 1 | Clamp, black (2) | 50500017 |
2 | Spring washer (2) | 50912-72 | |
3 | Billet footpeg mount, black (2) | 50500016 | |
4 | Socket head screw (4) | 4617 | |
Items mentioned in text, but not included in kit: | |||
A | Position this part of the bracket toward the motorcycle | ||
B | Locknut from kit 94133-01 | ||
C | Bolt from kit 94133-01 | ||