1. | See Figure 1. Partially fasten a #10 set screw (5) into the threaded hole in each of the axle-nut cover spacers (3). | |
2. | Position each spacer over an axle nut. Tighten the set screws to 3.4 N·m (30 in-lbs). | |
3. | Partially fasten a 1/4-20 set screw (2) into the threaded hole in each axle-nut cover (1, 4). | |
4. | Position each axle-nut cover over the spacer on the appropriate axle nut. | |
5. | Adjust the position of the exhaust system as necessary to provide axle-nut clearance. | |
6. | Tighten the axle-nut cover set screws to 7.9 N·m (70 in-lbs). |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Axle-nut cover, left side | Not Sold Separately |
2 | Set screw, 1/4-20 x 1/4 inch (2) | 3231B |
3 | Axle-nut spacer (2) | Not Sold Separately |
4 | Axle-nut cover, right side | Not Sold Separately |
5 | Set screw, 10-24 x 1/4 inch (2) | Not Sold Separately |