0/0
Voltage Regulator Cover Kit
J018072013-11-01
GENERAL
Kit Number
74543-00
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Kit Contents
See Figure 1 and Table 1.
There are no Service Parts available with this kit.
INSTALLATION
  1. Remove regulator mounting locknuts and discard .
  2. See Figure 1. Thread the spacers (1) onto the studs. Tighten to 84-120 in-lbs (9.4-13.5 Nm).
  3. Position the cover (2) over the spacers and fasten with 1/4-20 screws (3). Tighten to 40-50 in-lbs (4.5-5.6 Nm).
SERVICE PARTS
Figure 1. Service Parts: Voltage Regulator Cover Kit
Table 1. Service Parts Table
Item
Description (Quantity)
Part Number
1
Spacer (2)
Not Sold Separately
2
Cover
Not Sold Separately
3
Screw, 1/4-20, (2)
Not Sold Separately