0/0
DYNA CHROME ENGINE COVER KIT
J037232012-11-09
GENERAL
Kit Number
16327-06B
Models
For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references service manual information. A service manual for this model motorcycle is required for this installation and is available from a Harley-Davidson dealer.
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
The chrome engine covers are direct replacements for the original equipment (OE) engine covers. Installation procedures for this kit are the same as the OE installation procedures in the service manual.
NOTE
Refer to the service manual for engine cover removal and installation procedures.
SERVICE PARTS
Figure 1. Service Parts, Dyna Chrome Engine Cover Kit
Table 1. Service Parts, Dyna Chrome Engine Cover Kit
Item
Description (Quantity)
Part Number
1
Primary chaincase cover (chrome)
60764-06A
2
Primary chaincase cover gasket
60547-06
3
Rocker cover (2)
17572-99
4
Rocker housing gasket (2)
16719-99B
5
Clutch cover (Chrome)
60766-06
6
Clutch cover, seal
25418-06
7
Rocker cover, lower (chrome) (2)
17573-99A
8
Rocker cover gasket (2)
17386-99A
9
Transmission top cover (chrome)
34469-06B
10
Transmission top cover gasket
34917-06
11
Transmission side cover (chrome)
37116-06
12
Transmission side cover gasket
36805-06
13
Tappet cover, rear (chrome)
17966-99
14
Tappet cover gasket (2)
18635-99B
15
Tappet cover, front (chrome)
17964-99
16
Cam cover (chrome)
25369-01B
17
Cam cover gasket
25244-99A
18
O-Ring (4)
11293
19
O-Ring (4)
11132A
20
O-Ring, Push-Rod, Lower Guide (4)
11145A