Bullet Style Turn Signal Trim Rings
J030842009-01-27
GENERAL
Kit Number
69752-04, 69753-04, 69754-04, 69755-04, 69758-05, 69759-05, 69760-05, 69761-05, 73342-09, 73343-09
Models
For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Additional Parts Required
WARNING
Rider and passenger safety depend upon the correct installation of this kit. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00308b)
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
  1. See Figure 1. Locate the removal notch on the turn signal lens and carefully pry from housing. Discard lens. Repeat for other lens.
  2. Remove bulbs from turn signal assemblies.
  3. Obtain new amber bulbs from kit and install. Bulbs marked 1157A (Dual Filament) are for front turn signal assemblies. Bulbs marked 1156A (Single Filament) are for rear turn signal assemblies.
  4. Obtain new trim/lens assemblies from kit and install by snapping into place. Check turn signals for proper operation.
  5. Press on the outer edges of the lens (not on the chrome trim ring around the lens) until the lens snaps into the housing, or the trim ring may be damaged.
SERVICE PARTS
Figure 1. Service Parts: Bullet Style Turn Signal Trim Rings
Table 1. Service Parts Table
Item
Description (Quantity)
Part
Number
Front
Kit Numbers 69754-04, 69760-05 (with Visor)
1
Clear lens, bullet, turn signal (2)
2
Amber bulb, 1157A (2)
69331-02
Rear
Kit Numbers 69755-04, 69761-05 (with Visor)
1
Clear lens, bullet, turn signal (2)
2
Amber bulb, 1156A (2)
69330-02
Front
Kit Numbers 69752-04, 69758-05, 73342-09 (with Visor)
1
Gray lens, bullet, turn signal (2)
2
Amber bulb, 1157A (2)
69331-02
Rear
Kit Numbers 69753-04, 69759-05, 73343-09 (with Visor)
1
Gray lens, bullet, turn signal (2)
2
Amber bulb, 1156A (2)
69330-02
Items mentioned in text but not included in kit:
A
Trim ring (with Visor)
B
Trim ring (without Visor)
C
Pry notch is at base of trim ring (not shown)