0/0
SPEEDOMETER/TACHOMETER CHROME TRIM RING
J037242005-03-04
GENERAL
Kit Number
74661-04 and 74662-04
Models
Kit 74661-04 fits 1999 and later Softail (except FXSTD), FXDWG, and FLHR models with 4-5/8 inch gauge.
Kit 74662-04 fits 1999 and later XL and Dyna models (except FXDWG models) with 3-3/4 inch gauge.
Kit Contents
This kit includes the chrome trim ring with the adhesive tape already installed. There are no Service Parts available.
INSTALLATION
NOTE
Clean and dry surface of gauge with rubbing alcohol to ensure part is free of grease and debris.
  1. See Figure 1. Before peeling off adhesive back, run and test fit by placing chrome trim ring (1) onto gauge (2).
  2. Peel off adhesive backing from chrome trim ring (1).
  3. Place chrome trim ring (1) on gauge (2) and press firmly into position.
1Chrome trim ring
2Speedometer/Tachometer gauge
3Instrument panel
Figure 1. Installing Chrome Trim Ring (Softail model shown)