0/0
HEADLAMP VISORS
J038882005-11-14
GENERAL
Kit Number
Table 1. Kits
Kit Number
Description
67752-77T
Chrome, plain
67791-87T
Chrome, with chrome wings
67791-91T
Chrome, with gold finish wings
68098-96
Chrome, with Fat Boy logo
69793-07
Chrome, with Skull logo
Models
These kits fit all motorcycle models equipped with 7-inch headlamps.
These kits do not fit models equipped with Headlamp Trim Ring Kits part numbers 69626-99, 69627-99, 69733-05, and 69734-05.
Additional Parts Required
FLHR (Road King) models require the separate purchase of Headlamp Mounting Kit 67761-96, which is available from any Harley-Davidson dealer.
Kit Contents
There are no Service Parts available with these kits.
INSTALLATION
  1. See Figure 1. Remove original equipment bottom screw (1) and trim ring (2). Save parts for later use.
  2. See Figure 3 and Table 2. Install headlamp visor (1) from kit and trim ring (A) previously removed.
    3. NOTE
    Make sure the screw holes in the trim ring and the headlamp assembly are aligned as it is difficult to rotate the trim ring when it is fully seated.
  3. Loosely install bottom screw (C) previously removed on trim ring. Do not tighten at this time.
  4. See Figure 2. Visually check to ensure that rubber bumpers on inside face of headlamp housing are not caught.
  5. Snug bottom screw on trim ring and headlamp visor.
  6. Rotate visor from side to side around headlamp assembly (B) if ring is caught on face of headlamp.
  7. Push down on top of trim ring and push in on the bottom of the trim ring to fully seat the headlamp visor.
  8. While tightening the bottom screw, continue to maintain inward pressure on bottom of headlamp visor, until screw is tight and trim ring is fully seated.
1Bottom screw
2Trim ring
3Headlamp
Figure 1. Original Equipment Headlamp Trim Ring
Figure 2. Check rubber bumpers on inside face of headlamp housing
SERVICE PARTS
Figure 3. Headlamp Visor
Table 2. Headlamp Visor
Item
Description (Quantity)
Part Number
1
Headlamp visor, 7-inch
Not Sold Separately
Items mentioned in text, but not included in kit:
A
Trim ring
B
Headlamp assembly
C
Bottom screw