1. | See Figure 2. Obtain the two air deflectors (1 and 2) and two thumb tabs (4) from the kit. Position one air deflector so the three hinge mounting Phillips screw heads at the bottom of the deflector are facing you. NOTE Ambient temperature should be at least 60° F (16° C) for proper adhesion of the thumb tab to the air deflector wing. For easiest operation, mount the thumb tab in line with the hinges of the deflector wing, in the molded depression second from the top (see Figure 1 ). The thumb tab should be mounted with the five ribs at the top. |
Figure 1. Install Thumb Tab (Left Side Shown) | ||||
2. | Obtain the alcohol wipe (5) from the kit. Open the packet, and use the wipe to thoroughly clean the thumb tab mounting area of any dirt or grease. | |||||
3. | Peel the liner from the adhesive backing of the thumb tab. Carefully position the tab to the air deflector, and press firmly into the position indicated in Figure 1. Hold the tab in position with steady pressure for five minutes to ensure proper adhesion. | |||||
4. | Repeat Step 3 for the opposite air deflector. |
Item | Description (Quantity) | Part Number |
---|---|---|
1 | Air deflector, adjustable (right side) | Not sold separately |
2 | Air deflector, adjustable (left side) | Not sold separately |
3 | Thumb screw, knurled, #10-24 x 3/4 in. (6) | Not sold separately |
4 | Tab, thumb (2) | Not sold separately |
5 | Alcohol wipe | Not sold separately |
Item mentioned in text, but not included in kit: | ||
A | Original equipment hole plug (6) |