6 SPEED TRANSMISSION MAINSHAFT KIT
J043742007-07-18
GENERAL
Kit Number
35467-06A
Models
This kit fits 2006 Dyna models and 2007 models equipped with a Twin Cam engine.
Additional Parts Required
Proper installation of this kit requires the use of the following tools: Retaining Ring Pliers (J-5586-A) and Bearing Race Puller and Installation Tool (HD-34902-B).
WARNINGRider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
NOTE
This instruction sheet references Service Manual information. A Service Manual for your model motorcycle is required for this installation and is available from a Harley-Davidson Dealer.
Kit Contents
Table 1. Kit Contents
Description (Quantity) | Part Number |
|---|---|
Mainshaft | 35467-08 |
Inner race, bearing | 34091-08 |
INSTALLATION
NOTE
The diameter of the mainshaft in this kit is 0.203 mm (0.008 in) smaller than the stock mainshaft diameter. The matching bearing inner race, which is 2.5 mm (0.1 in) longer than stock and included in this kit must be installed when replacing the mainshaft.
Refer to an appropriate Service Manual and replace the transmission mainshaft. Proper installation of this kit also requires the replacement of the mainshaft bearing inner race, which is also included in this kit.