Custom Shifter Peg Kit
J043782007-07-06
GENERAL
Kit Number
34608-95, 34626-95, 34627-99, 34664-04
Models
For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
NOTE
A Service Manual for your model motorcycle is available from a Harley-Davidson Dealer.
INSTALLATION
| 1. | Remove and discard previously installed shifter peg from motorcycle. If needed, use a heat gun to apply heat to the shift lever and shifter peg threads to aid in peg removal. | |
| 2. | See Figure 1. Insert the screw through the peg, tread, spacer (if required) into the shift lever. Tighten screw to 15–20 N·m (11–15 ft-lbs). |
SERVICE PARTS
Figure 1. Service Parts: Shifter Peg Kits
Table 1. Service Parts Table
Item | Description (Quantity) | Part Number |
|---|---|---|
A - Kit 34608-95 | ||
1 | Shifter peg body | Not Sold Separately |
2 | Shifter peg insert | Not Sold Separately |
3 | Spacer tube | 50784-97 |
4 | Screw, button head cap | 94545-03 |
B - Kit 34626-95 | ||
1 | Shifter peg body | Not Sold Separately |
2 | Shifter peg insert | Not Sold Separately |
3 | Shifter peg insert | Not Sold Separately |
4 | Shifter peg insert | Not Sold Separately |
5 | Screw, button head cap | 9495 |
C - Kit 34627-99 | ||
1 | Shifter peg body | Not Sold Separately |
2 | Shifter peg insert | Not Sold Separately |
3 | Spacer tube | 50784-97 |
4 | Screw, button head cap | 94545-03 |
D - Kit 34664-04 | ||
1 | Shifter peg body | 49220-04 |
2 | Shifter peg insert | 49221-04 |
3 | Spacer tube | 50784-97 |
4 | Screw, button head cap | 94545-03 |